Perhaps I am trying to do the impossible...

Trying to use a USB - CD ROM (actually a CD-R but it would appear that the
distinction matters). Redhat 7.1 - Kernel 2.4.2 I think

added to modules.conf
 alias char-major-8 sd_mod

added to fstab
 /proc/bus/usb  /mnt/usbcd  usbdefs   owner,exec,suid,ro,noautho 0 0

dmesg sees USB contoller and device but reports no driver available.

HELP!

less /proc/bus/usb/devices reports...
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=fce0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=07e5 ProdID=5c01 Rev= 2.00
S:  Manufacturer=QPS, Inc.
S:  Product=Que! Drive USB
S:  SerialNumber=06655033kuw02ecq
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
I:  If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
I:  If#= 0 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms

Craig

----:----|----:----|----:----|----:----|----:----|----:----|
- Craig White - PO Box 8634 - Scottsdale, Arizona - 85252
- e-mail address ................ - CraigWhite@AzApple.com
- world wide web address ........ - http://www.AzApple.com
- e-mail my pager address ....... - 6023779752@airtouch.net
- cellular phone ................ - (602) 377-9752
- voice/facsimile ............... - (480) 945-8445
----:----|----:----|----:----|----:----|----:----|----:----|

> -----Original Message-----
> From: plug-discuss-admin@lists.plug.phoenix.az.us
> [mailto:plug-discuss-admin@lists.plug.phoenix.az.us]On Behalf Of Jason
> Sent: Sunday, May 06, 2001 8:26 PM
> To: plug-discuss@lists.plug.phoenix.az.us
> Subject: Re: [off topic] Save mp3 files
>
>
> "Michael J. Schweppe" wrote:
> >
> > Hi All:
> >
> > I'm almost ready to upgrade to Red Hat 7.1 from 6.2.  At the same time
> > I've decided to increase my hard drive from 8 GB to 30 GB.
> >
> > The issue at hand is that I have several mp3 files on the current 8 G
> > drive.
> >
> > What changes do I need to make on the current drive to make it a slave
> > to the new 30 GB drive?
>
> Change the jumpers... usually it involves moving one jumper.
>
> No other changes, just set up a mount point for it, etc.
>
> --
> jkenner @ mindspring . com__
> I Support Linux:           _> _  _ |_  _  _     _|
> Working Together To       <__(_||_)| )| `(_|(_)(_|
> To Build A Better Future.       |                   <s>
> ________________________________________________
> See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail
> doesn't post to the list quickly and you use Netscape to write mail.
>
> PLUG-discuss mailing list  -  PLUG-discuss@lists.PLUG.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss