US West should be setting up the modem in PPP mode which should start
issuing addresses like 10.0.0.2 - if the nic that is connected to the Cisco
(yellow cable, filter end towards the Cisco) is set to DHCP it should get an
ip address from the modem. If the modem is set to bridging mode...all bets
are off.

Craig

> -----Original Message-----
> From: plug-discuss-admin@lists.plug.phoenix.az.us
> [mailto:plug-discuss-admin@lists.plug.phoenix.az.us]On Behalf Of Kevin
> Brown
> Sent: Saturday, April 22, 2000 8:50 PM
> To: plug-discuss@lists.plug.phoenix.az.us
> Subject: Re: us pest and dsl
>
>
> OK, I have some experience dealing with NT4 and the DSL router,
> so I have a
> couple of questions.  First go to the command prompt (hopefully
> W2K still has
> it) and type in:
> ipconfig /all
>
> What does it list as the DHCP server.  If the IP is anything
> other than 10.0.0.1
> then that is your most likely problem for not getting an ip from
> the router.
>
> > ok guys, don't flame me too bad for things. but i've seen that
> some of you
> > run windows 2000 at work or other places and have a question on
> that. just
> > set up win2k for learning purposes at home and have the cisco
> 675. problem
> > is winblows can't obtain an ip address from the router but has
> picked up an
> > ip address from houdini or something. doing support for hp so
> thought i'd
> > set it up to see what i would be doing in the near future.
> anyway, anyone
> > run across win2k and the cisco and know the proper settings?
> >
> > and yes i would have posted this to a ms mail site if i had a browser
> > loaded on this old mac and could look one up.
>
> --
> "Intel giveth and Microsoft Taketh Away" - Gordon Moore
>
> _______________________________________________
> Plug-discuss mailing list  -  Plug-discuss@lists.PLUG.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>