How do I reset the counters without rebooting? I compiled the 2.2.13 and will probably move up to the latest stable kernel. ----- Original Message ----- From: Furmanek, Greg To: Sent: Wednesday, March 22, 2000 9:26 AM Subject: RE: Network Errors > The stuff on the lo bothers me. > This is not like you would have hardware problem. > The loopback is done in software. > > So unless you have a screwed up TCP/IP stack (part of a kernel) > I would suspect outside "intervention". > It is possible someone is sending you packets > in order to overload some buffer in your stack. > > However if these just happened after you upgraded kernel. > I would try to reset the counters and boot up the old kernel > and see if these problems appear. > > Another option would be to go to the next kernel 2.2.14. > > I do not know if you compiled 2.2.13 of gotten it from some > distro but you may want to try to compile the old kernel with > and without optimization and run these for a while. > > good luck > > The Wolf > > -----Original Message----- > From: Amir Aliabadi [mailto:amir@aliabadi.com] > Sent: Tuesday, March 21, 2000 10:33 PM > To: plug-discuss@lists.PLUG.phoenix.az.us > Subject: Re: Network Errors > > > I have been getting a probe on port 1080 from time to time. > No sniffing with a sniffer. > I'm planning up adding to my ipchain rules. > Could it be (is it likely to be) a physical thing (bad cable/hub/card) or > does something stink around here? > > > _______________________________________________ > Plug-discuss mailing list - Plug-discuss@lists.PLUG.phoenix.az.us > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss