<div dir="ltr"><div>More useless cable modem info as noted from several recent projects<br>There are several models of this cable modem, this one has VOIP. VOIP needs a IP address so you cannot by default turn off NAT or do a Transparent Bridge because the VOIP would need to be set up externally, not inside the modem. VOIP models usually have a battery to run the phone/modem during power outages/emergency, but if you edit the config and pull the power to
reboot as I did, it kept running on battery and never changed till I
removed the battery---live & learn. You can do some port forwarding but I have not tried it. If you need/whine they will provide a two piece VOIP and standard non
VOIP modem but I have not seen what they are using for that yet, but that is what was done to get a public IP address for a camera system.<br></div><div>Non-VOIP models can usually be bridged and port forwarded simular to Century Link DSL modems.<br>For business accounts they generally run two cables, one for phone only, and one for internet but with a multiple static IP addresses modem. <br></div><div><br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Sat, Feb 28, 2015 at 8:28 PM, Michael Butash <span dir="ltr"><<a href="mailto:michael@butash.net" target="_blank">michael@butash.net</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000">
<div>Those boxes only give you access to
view, not write the config - it's part of the docsis standard to
disallow client-side mucking with the cable interface or
addressing, and probably subsequently the internal addressing as
well via nat unless the gui lets you somehow.<br>
<br>
It shouldn't nat you to the 10.x interfaces, those are just for
the modem to register on, and also the 172.x as Todd said for the
modem or some such.<br>
<br>
I think with those you can make them a dumb bridge, setting them
to become nothing more than a modem, which case just use your own
router behind it, like a nice dd-wrt|tomato run unit. You're much
better off this way than using it, I've never anything but bad
about the integrated modem/routers.<span class="HOEnZb"><font color="#888888"><br>
<br>
-mb</font></span><div><div class="h5"><br>
<br>
<br>
On 02/28/2015 07:37 PM, David Demland wrote:<br>
</div></div></div><div><div class="h5">
<blockquote type="cite">
<div>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Todd,<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Thank
you for the information, the Level 2 support guy never
mention that I could do that. I will check on it.<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">David<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p>
<div style="border:none;border-top:solid #b5c4df 1.0pt;padding:3.0pt 0in 0in 0in">
<p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">From:</span></b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">
<a href="mailto:plug-discuss-bounces@lists.phxlinux.org" target="_blank">plug-discuss-bounces@lists.phxlinux.org</a>
[<a href="mailto:plug-discuss-bounces@lists.phxlinux.org" target="_blank">mailto:plug-discuss-bounces@lists.phxlinux.org</a>] <b>On
Behalf Of </b>Todd Cole<br>
<b>Sent:</b> Saturday, February 28, 2015 6:21 PM<br>
<b>To:</b> Main PLUG discussion list<br>
<b>Subject:</b> Re: Problems with Cisco DPQ3212 Cable
Modem and NAT<u></u><u></u></span></p>
</div>
<p class="MsoNormal"><u></u> <u></u></p>
<div>
<p class="MsoNormal">I tried to do that a while ago and failed
due to it had a voip that needed NAT internal for the phone
part I also learned that it would not reboot to apply new
settings till the battery was removed for a while. I called
Cox and they swapped it for a separate phone and separate
modem. no problem:)<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal"><u></u> <u></u></p>
<div>
<p class="MsoNormal">On Sat, Feb 28, 2015 at 5:33 PM, David
Demland <<a href="mailto:demland@cox.net" target="_blank">demland@cox.net</a>>
wrote:<u></u><u></u></p>
<div>
<div>
<p class="MsoNormal">Does
anyone know much about a Cisco DPQ3212 Cable Modem?
Cox put it in a few months ago and I did not think
much about it since every was working on my network.
However recently I had to log onto a VPN for a
customer and I could not. I started doing some
checking and here is what I have found:<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">Doing
a traceroute from my PC shows the following:<u></u><u></u></p>
<p class="MsoNormal">
1 <1 ms <1 ms <1 ms
881WRouter.42.168.192.in-addr.arpa [192.168.42.254]<u></u><u></u></p>
<p class="MsoNormal">
2 8 ms 8 ms 7 ms 10.32.4.1<u></u><u></u></p>
<p class="MsoNormal">
3 7 ms 7 ms 7 ms 172.21.1.224<u></u><u></u></p>
<p class="MsoNormal">
4 18 ms 19 ms 29 ms 70.169.74.52<u></u><u></u></p>
<p class="MsoNormal">
5 21 ms 21 ms 22 ms <a href="http://langbprj02-ae14.0.rd.la.cox.net" target="_blank">langbprj02-ae14.0.rd.la.cox.net</a>
[68.1.0.151]<u></u><u></u></p>
<p class="MsoNormal">
6 20 ms 21 ms 21 ms 72.14.215.221<u></u><u></u></p>
<p class="MsoNormal">
7 20 ms 21 ms 21 ms 209.85.248.185<u></u><u></u></p>
<p class="MsoNormal">
8 111 ms 32 ms 22 ms 209.85.142.91<u></u><u></u></p>
<p class="MsoNormal">
9 21 ms 21 ms 21 ms <a href="http://lax02s21-in-f4.1e100.net" target="_blank">lax02s21-in-f4.1e100.net</a>
[216.58.216.4]<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">Trace
complete.<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">Doing
a traceroute from the router show:<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">DemlandRouter#traceroute
216.58.216.4<u></u><u></u></p>
<p class="MsoNormal">Type
escape sequence to abort.<u></u><u></u></p>
<p class="MsoNormal">Tracing
the route to 216.58.216.4<u></u><u></u></p>
<p class="MsoNormal">VRF
info: (vrf in name/id, vrf out name/id)<u></u><u></u></p>
<p class="MsoNormal">
1 10.32.4.1 12 msec 8 msec 8 msec<u></u><u></u></p>
<p class="MsoNormal">
2 172.21.1.224 8 msec 8 msec 8 msec<u></u><u></u></p>
<p class="MsoNormal">
3 70.169.74.52 32 msec 24 msec 32 msec<u></u><u></u></p>
<p class="MsoNormal">
4 68.1.1.19 20 msec<u></u><u></u></p>
<p class="MsoNormal">
68.1.5.139 20 msec 20 msec<u></u><u></u></p>
<p class="MsoNormal">
5 72.14.215.221 24 msec 24 msec 20 msec<u></u><u></u></p>
<p class="MsoNormal">
6 209.85.248.185 24 msec 24 msec 24 msec<u></u><u></u></p>
<p class="MsoNormal">
7 209.85.142.91 24 msec 20 msec 24 msec<u></u><u></u></p>
<p class="MsoNormal">
8 216.58.216.4 24 msec 20 msec 24 msec<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">The
router’s routing table looks like:<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">DemlandRouter#show
route<u></u><u></u></p>
<p class="MsoNormal">route-map
COX_NAT, permit, sequence 10<u></u><u></u></p>
<p class="MsoNormal">
Match clauses:<u></u><u></u></p>
<p class="MsoNormal">
ip address (access-lists): 110<u></u><u></u></p>
<p class="MsoNormal">
interface FastEthernet4<u></u><u></u></p>
<p class="MsoNormal">
Set clauses:<u></u><u></u></p>
<p class="MsoNormal">
Policy routing matches: 0 packets, 0 bytes<u></u><u></u></p>
<p class="MsoNormal">DemlandRouter#show
ip route<u></u><u></u></p>
<p class="MsoNormal">Codes:
L - local, C - connected, S - static, R - RIP, M -
mobile, B - BGP<u></u><u></u></p>
<p class="MsoNormal">
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF
inter area<u></u><u></u></p>
<p class="MsoNormal">
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA
external type 2<u></u><u></u></p>
<p class="MsoNormal">
E1 - OSPF external type 1, E2 - OSPF external type 2<u></u><u></u></p>
<p class="MsoNormal">
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2
- IS-IS level-2<u></u><u></u></p>
<p class="MsoNormal">
ia - IS-IS inter area, * - candidate default, U -
per-user static route<u></u><u></u></p>
<p class="MsoNormal">
o - ODR, P - periodic downloaded static route, H -
NHRP, l - LISP<u></u><u></u></p>
<p class="MsoNormal">
+ - replicated route, % - next hop override<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">Gateway
of last resort is 98.165.177.1 to network 0.0.0.0<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">S*
<a href="http://0.0.0.0/0" target="_blank">0.0.0.0/0</a> [1/0] via 98.165.177.1<u></u><u></u></p>
<p class="MsoNormal">
<a href="http://10.0.0.0/8" target="_blank">10.0.0.0/8</a> is variably
subnetted, 4 subnets, 2 masks<u></u><u></u></p>
<p class="MsoNormal">C
<a href="http://10.0.42.0/24" target="_blank">10.0.42.0/24</a> is directly
connected, Vlan20<u></u><u></u></p>
<p class="MsoNormal">L
<a href="http://10.0.42.254/32" target="_blank">10.0.42.254/32</a> is directly
connected, Vlan20<u></u><u></u></p>
<p class="MsoNormal">C
<a href="http://10.42.0.0/24" target="_blank">10.42.0.0/24</a> is directly
connected, Vlan1<u></u><u></u></p>
<p class="MsoNormal">L
<a href="http://10.42.0.1/32" target="_blank">10.42.0.1/32</a> is directly
connected, Vlan1<u></u><u></u></p>
<p class="MsoNormal">
<a href="http://98.0.0.0/8" target="_blank">98.0.0.0/8</a> is variably
subnetted, 2 subnets, 2 masks<u></u><u></u></p>
<p class="MsoNormal">C
<a href="http://98.165.177.0/24" target="_blank">98.165.177.0/24</a>
is directly connected, FastEthernet4<u></u><u></u></p>
<p class="MsoNormal">L
<a href="http://98.165.177.11/32" target="_blank">98.165.177.11/32</a>
is directly connected, FastEthernet4<u></u><u></u></p>
<p class="MsoNormal">
<a href="http://172.16.0.0/16" target="_blank">172.16.0.0/16</a> is variably
subnetted, 2 subnets, 2 masks<u></u><u></u></p>
<p class="MsoNormal">C
<a href="http://172.16.42.0/24" target="_blank">172.16.42.0/24</a> is directly
connected, Vlan30<u></u><u></u></p>
<p class="MsoNormal">L
<a href="http://172.16.42.254/32" target="_blank">172.16.42.254/32</a>
is directly connected, Vlan30<u></u><u></u></p>
<p class="MsoNormal">
<a href="http://172.19.0.0/32" target="_blank">172.19.0.0/32</a> is subnetted, 1
subnets<u></u><u></u></p>
<p class="MsoNormal">S
172.19.73.61 [254/0] via 98.165.177.1, FastEthernet4<u></u><u></u></p>
<p class="MsoNormal">
<a href="http://192.168.42.0/24" target="_blank">192.168.42.0/24</a>
is variably subnetted, 2 subnets, 2 masks<u></u><u></u></p>
<p class="MsoNormal">C
<a href="http://192.168.42.0/24" target="_blank">192.168.42.0/24</a>
is directly connected, Vlan10<u></u><u></u></p>
<p class="MsoNormal">L
<a href="http://192.168.42.254/32" target="_blank">192.168.42.254/32</a>
is directly connected, Vlan10<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">The
modem’s IP is 192.168.100.1, seems rather standard,
and I can http to the modem but all I get a status
screen when I login. There is no username and password
to get to the status screen; but the I cannot find an
administrator login for the modem.<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">Looking
at all the output it seems clear that the modem is
doing a NAT, of private IP space 10.32.4.1, which
would be a problem. I need to turn off the NAT so that
everything works. That is the issue, I can find
nothing on line about this and I have talk to Cox
level two support and they have no idea.<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">The
think that confuses me most is that I am getting a
valid public IP on my Router (I can even VPN in into
my home network), but the traceroute never shows my
packets going through the public IP. Does any know how
to login into this modem and turn off NAT?<u></u><u></u></p>
<p class="MsoNormal"> <u></u><u></u></p>
<p class="MsoNormal">Thank
You,<u></u><u></u></p>
<p class="MsoNormal"><span style="color:#888888"> <u></u><u></u></span></p>
<p class="MsoNormal"><span style="color:#888888">David<u></u><u></u></span></p>
</div>
</div>
<p class="MsoNormal"><br>
---------------------------------------------------<br>
PLUG-discuss mailing list - <a href="mailto:PLUG-discuss@lists.phxlinux.org" target="_blank">PLUG-discuss@lists.phxlinux.org</a><br>
To subscribe, unsubscribe, or to change your mail
settings:<br>
<a href="http://lists.phxlinux.org/mailman/listinfo/plug-discuss" target="_blank">http://lists.phxlinux.org/mailman/listinfo/plug-discuss</a><u></u><u></u></p>
</div>
<p class="MsoNormal"><br>
<br clear="all">
<br>
-- <u></u><u></u></p>
<div>
<p class="MsoNormal">Todd Cole<br>
Ubuntu Arizona Team<br>
4605 S PRIEST DR LOT 3<br>
TEMPE AZ 85282-6507 <br>
<a href="mailto:toddc@azloco.com" target="_blank">toddc@azloco.com</a><br>
<a href="tel:602-677-9402" value="+16026779402" target="_blank">602-677-9402</a><u></u><u></u></p>
</div>
</div>
</div>
<br>
<fieldset></fieldset>
<br>
<pre>---------------------------------------------------
PLUG-discuss mailing list - <a href="mailto:PLUG-discuss@lists.phxlinux.org" target="_blank">PLUG-discuss@lists.phxlinux.org</a>
To subscribe, unsubscribe, or to change your mail settings:
<a href="http://lists.phxlinux.org/mailman/listinfo/plug-discuss" target="_blank">http://lists.phxlinux.org/mailman/listinfo/plug-discuss</a></pre>
</blockquote>
<br>
</div></div></div>
<br>---------------------------------------------------<br>
PLUG-discuss mailing list - <a href="mailto:PLUG-discuss@lists.phxlinux.org">PLUG-discuss@lists.phxlinux.org</a><br>
To subscribe, unsubscribe, or to change your mail settings:<br>
<a href="http://lists.phxlinux.org/mailman/listinfo/plug-discuss" target="_blank">http://lists.phxlinux.org/mailman/listinfo/plug-discuss</a><br></blockquote></div><br><br clear="all"><br>-- <br><div class="gmail_signature">Todd Cole<br>Ubuntu Arizona Team<br>4605 S PRIEST DR LOT 3<br>TEMPE AZ 85282-6507
<br><a href="mailto:toddc@azloco.com" target="_blank">toddc@azloco.com</a><br>602-677-9402<br></div>
</div>