<div dir="ltr"><div>Mike,</div><div> It's been a long time since I had to build a cross compiler. What a bear that task is! I fought and researched and learned a lot about it. Still what ultimately helped me accomplish it was the work that was started by Dan Kegel on a tool called crosstool.</div>
<div><br></div><a href="http://kegel.com/crosstool/">http://kegel.com/crosstool/</a><br><div><br></div><div>That tool didn't have exactly the support for what I needed at the time but I found it cleanly designed and easily updatable to accomplish what I was targeting (Which was ppc from x86).</div>
<div><br></div><div>Building a toolchain takes many hours of compiling and lots of frustrations when some error during the process... Im not sure if crosstool has been updated in a long time but it might be worth looking at least as some instructions in script form.</div>
<div><br></div><div>Good luck!</div></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Tue, May 13, 2014 at 2:39 PM, Mike Bushroe <span dir="ltr"><<a href="mailto:mbushroe@gmail.com" target="_blank">mbushroe@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div><div> I am working on the switch/routers that form the backbone of the Space Station LAN (Joint Station LAN or JSL). The ppc processors that control the switching fabric, perform the routing functions, SNMP, and all other network functions are about 10 years old. Parts of the Flash have been updated frequently for Firmware Upgrades. But the OS files (Linux 2.4.22-1.3 "Red Haggis" Kernel) have never been refreshed and are at the end of the manufacture's data retention time. It looks like I may need to cross-compile a stripped down version of busybox, load it into the ramdisk, change root to the ramdisk, unmount then remount (?) the Flash drive to make sure no files are active, then run a script to go through every file in the system to copy it, md5sum old and new, if no errors delete the old and rename the new.<br>
<br></div> From what I have read so far, this will require getting a copy of the kernel header files, which the vendor of the card is not currently willing to do. The next best would be to get the generic header files for this or a close release and use those. I am also confused about this process. The header files define the functions and variables, but not their address in memory. I am assuming that dynamic linking to the kernel function happens when the program starts, or are the function calls all sent to one address which then determines which call was requested and branches of to the correct code? Or is there another file(s) that contains the loader information on the kernel routines and I will need to find or decipher that too before a successful cross-compile can happen?<br>
<br></div> Sorry to dump a tough one on the group when I have added little recently, but if I can get this going soon enough, it might actually get used on the flight hardware. Otherwise it will be deemed a 'science project' and cancelled in favor of just copying over the minimum number of system files to run the script and using that instead of a stripped busy box. On the other hand, if I can get this to work, I can also tweak the nandflash calls to attempt to recover bad blocks that are only bad because the data aged out. Currently, all the programs that work with nand flash don't allow any interaction with marked bad blocks. But if the blocks only failed because the data evaporated, a few write - erase cycles should freshen it back up to being fully functional and probably just as reliable as the blocks that hadn't aged out yet!<span class="HOEnZb"><font color="#888888"><br clear="all">
<div><div><div><br><br></div><div>Mike<br></div><div>-- <br><div dir="ltr"><span style="font-family:arial,sans-serif;font-size:11pt">"Creativity is intelligence having fun." — Albert Einstein</span></div>
</div></div></div></font></span></div>
<br>---------------------------------------------------<br>
PLUG-discuss mailing list - <a href="mailto:PLUG-discuss@lists.phxlinux.org">PLUG-discuss@lists.phxlinux.org</a><br>
To subscribe, unsubscribe, or to change your mail settings:<br>
<a href="http://lists.phxlinux.org/mailman/listinfo/plug-discuss" target="_blank">http://lists.phxlinux.org/mailman/listinfo/plug-discuss</a><br></blockquote></div><br></div>