Radeon RX580 and trouble with Ffmpeg

[Jim]

Thanks Ryan for the advice.  You mentioned the mesa and vdpau drivers 
for hardware video acceleration.  I'm testing handbrake now by having it 
transcode the same video (25 minutes) and same settings I mentioned 
earlier. ( H264 1440x1080 to 640x480).  This time it's also using around 
95% of the cpu and transcoding at around 80 fps.  Is it using the 
hardware acceleration?


Thanks

On 4/5/24 15:37, Ryan Petris via PLUG-discuss wrote:
> Yeah, I wouldn't use the proprietary AMD drivers. Jim, undo whatever 
> it is that you did with the amdgpu-pro drivers and install the 
> "xserver-xorg-video-amdgpu" (if you're on debian or a debian based 
> distro, which I assume you are based on the mentioning of a deb 
> package) and restart. That should be all you need.
>
> If you're wanting hardware video acceleration you can also install the 
> following packages:
>
> mesa-va-drivers
> vdpau-driver-all
>
> Those are listed on this wiki page: 
> https://wiki.debian.org/HardwareVideoAcceleration
>
> On Fri, Apr 5, 2024, at 3:29 PM, z via PLUG-discuss wrote:
>> I also don't think I made it clear that mesa is probably better than 
>> the proprietary AMD drivers on linux. The same is untrue on NVIDIA.
>>
>> Apr 5, 2024 15:11:16 z via PLUG-discuss 
>> <plug-discuss at lists.phxlinux.org>:
>>
>>     Do you truly need proprietary drivers? That card is one of the
>>     best supported by open source software. So I would just install
>>     mesa, which should be easily installed from your distro's package
>>     manager, if it's not installed already.
>>
>>     Assuming you do need proprietary, maybe try a reboot if you
>>     haven't already? It's giving a missing binary error and sometimes
>>     I get those after a kernel update and not rebooting.
>>
>>
>>
>>     Zack
>>
>>     Apr 5, 2024 14:43:44 Jim via PLUG-discuss
>>     <plug-discuss at lists.phxlinux.org>:
>>
>>         Today the Radeon RX580 graphics card I bought arrived.  To
>>         get the drivers for the card, I went here
>>
>>         https://www.amd.com/en/support
>>         <https://www.amd.com/en/support> where I downloaded
>>         amdgpu-install_6.0.60002-1_all.deb
>>
>>         Next I started following the instructions at
>>         https://amdgpu-install.readthedocs.io/en/latest/
>>         <https://amdgpu-install.readthedocs.io/en/latest/> then I
>>         started running into problems.
>>
>>         amdgpu-install --vulkan=amdvlk,pro gave me 2 errors:
>>
>>         E: Unable to locate package vulkan-amdgpu-pro and the same
>>         for vulkan-amdgpu-pro:i386
>>
>>         I kept going and entered amdgpu-install -y --usecase=workstation
>>
>>         That returned the errors Unable to locate package amdgpu-pro
>>         and amdgpu-pro-lib32
>>
>>         With the error messages I figured I'd have problems, but I
>>         tried to find out if I could use the hardware acceleration so
>>         I entered|:|
>>
>>         |ffmpeg -i input.mp4 -c:v h264_amf -c:a copy output.mp4
>>
>>         That gave me several errors.  The first one was [h264_amf @
>>         0x562e1f855380] DLL libamfrt64.so.1 failed to open|
>>
>>         |So I tried sudo updatedb and locate libamfrt64.so.1 which
>>         returned nothing.  That told me the file wasn't there.|
>>
>>         |I tried to transcode a file with Handbrake but it didn't
>>         show h264_amf among the available codec options.|
>>
>>         |I tried searching for how to install libamfrt64.so.1 but all
>>         I got was references to steps I already tried.|
>>
>>         |Did I make a mistake somwhere or does AMD need to fix
>>         something?|
>>
>>         |Thank for your help.|
>>
>>         |Jim|
>>
>>
>> ---------------------------------------------------
>> PLUG-discuss mailing list: PLUG-discuss at lists.phxlinux.org
>> To subscribe, unsubscribe, or to change your mail settings:
>> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>
>
>
> ---------------------------------------------------
> PLUG-discuss mailing list:PLUG-discuss at lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20240405/1a6ee08c/attachment.htm>