wireless card
Michael
bmike1 at gmail.com
Wed Nov 22 19:44:56 MST 2017
well it is the same distro different version. Do you think upgrading the
desktop will do amything?
On Wed, Nov 22, 2017 at 9:42 PM, Michael <bmike1 at gmail.com> wrote:
> well dang! I got the same card working in my tower though.
>
> On Wed, Nov 22, 2017 at 9:40 PM, James Mcphee <jmcphe at gmail.com> wrote:
>
>> [ 15.881957] ieee80211 phy0: rt2800_init_eeprom: Error - Invalid RF
>> chipset 0x5362 detected
>> says it hates your driver
>>
>> probably should check the forums of whatever distro you're using for that
>> device to see if anyone else has problems. a google of the device name as
>> it shows in lspci shows lots of folk with various fiddliness with like
>> chips.
>>
>> On Wed, Nov 22, 2017 at 7:22 PM, Michael <bmike1 at gmail.com> wrote:
>>
>>> ~ $ lsmod |grep 2800pci
>>> rt2800pci 13606 0
>>> rt2800mmio 20986 1 rt2800pci
>>> rt2800lib 89076 2 rt2800pci,rt2800mmio
>>> rt2x00pci 13287 1 rt2800pci
>>> rt2x00mmio 13603 2 rt2800pci,rt2800mmio
>>> rt2x00lib 55307 5 rt2x00pci,rt2800lib,rt2800pci,
>>> rt2800mmio,rt2x00mmio
>>> eeprom_93cx6 13344 1 rt2800pci
>>>
>>>
>>> On Wed, Nov 22, 2017 at 9:17 PM, James Mcphee <jmcphe at gmail.com> wrote:
>>>
>>>> does lsmod show rt2800pci?
>>>>
>>>> On Wed, Nov 22, 2017 at 7:06 PM, Michael <bmike1 at gmail.com> wrote:
>>>>
>>>>> ~ $ sudo lspci
>>>>> [sudo] password for kodi:
>>>>> 00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller
>>>>> (rev 02)
>>>>> 00:01.0 PCI bridge: Intel Corporation 82Q35 Express PCI Express Root
>>>>> Port (rev 02)
>>>>> 00:03.0 Communication controller: Intel Corporation 82Q35 Express MEI
>>>>> Controller (rev 02)
>>>>> 00:03.2 IDE interface: Intel Corporation 82Q35 Express PT IDER
>>>>> Controller (rev 02)
>>>>> 00:03.3 Serial controller: Intel Corporation 82Q35 Express Serial KT
>>>>> Controller (rev 02)
>>>>> 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB
>>>>> UHCI Controller #4 (rev 02)
>>>>> 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB
>>>>> UHCI Controller #5 (rev 02)
>>>>> 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2
>>>>> EHCI Controller #2 (rev 02)
>>>>> 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
>>>>> Controller (rev 02)
>>>>> 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
>>>>> Port 1 (rev 02)
>>>>> 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB
>>>>> UHCI Controller #1 (rev 02)
>>>>> 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB
>>>>> UHCI Controller #2 (rev 02)
>>>>> 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB
>>>>> UHCI Controller #3 (rev 02)
>>>>> 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2
>>>>> EHCI Controller #1 (rev 02)
>>>>> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
>>>>> 00:1f.0 ISA bridge: Intel Corporation 82801IO (ICH9DO) LPC Interface
>>>>> Controller (rev 02)
>>>>> 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH)
>>>>> 6 port SATA Controller [AHCI mode] (rev 02)
>>>>> 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller
>>>>> (rev 02)
>>>>> 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc.
>>>>> [AMD/ATI] Caicos PRO [Radeon HD 7450]
>>>>> 01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Caicos
>>>>> HDMI Audio [Radeon HD 6400 Series]
>>>>> 03:00.0 Network controller: Ralink corp. RT5362 PCI 802.11n Wireless
>>>>> Network Adapter
>>>>> kodi at kodi-OptiPlex-755 ~ $
>>>>>
>>>>> On Wed, Nov 22, 2017 at 8:17 PM, James Mcphee <jmcphe at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> response with lspci output for wireless device would help. maybe
>>>>>> it's a known funky chipset. it's probably in the wall of text somewhere,
>>>>>> but lspci is a good tool for grabbing your peripherals.
>>>>>>
>>>>>> On Wed, Nov 22, 2017 at 5:05 PM, Michael <bmike1 at gmail.com> wrote:
>>>>>>
>>>>>>> My wireless card isn't working (never has). Could someone take a
>>>>>>> look and tell me what I need to do to get it to work? Here is a link to
>>>>>>> dmesg and and /var/log/syslog:
>>>>>>> https://drive.google.com/drive/folders/1ZkeLVAytkRQW1q57Ykt
>>>>>>> gOh4lL8VbfDwa?usp=sharing
>>>>>>>
>>>>>>> after inspecting the syslog I see that actually sees the wireless
>>>>>>> router but according to the gui there is 'no network connection' available.
>>>>>>> I believe things start falling apart around 7:1:20....
>>>>>>> that was this morning! When I started it this afternoon the network
>>>>>>> starts initiating around 17:23:19. or another start was around 17:42:01
>>>>>>>
>>>>>>> dmesg was a bit more helpful! (perhaps- look at the last line_
>>>>>>>
>>>>>>> [ 15.729249] ACPI Warning: 0x0000000000000828-0x000000000000082f
>>>>>>> SystemIO conflicts with Region \GLBC 1 (20131115/utaddress-251)
>>>>>>> [ 15.729254] ACPI Warning: 0x0000000000000828-0x000000000000082f
>>>>>>> SystemIO conflicts with Region \SACT 2 (20131115/utaddress-251)
>>>>>>> [ 15.729257] ACPI Warning: 0x0000000000000828-0x000000000000082f
>>>>>>> SystemIO conflicts with Region \SSTS 3 (20131115/utaddress-251)
>>>>>>> [ 15.729260] ACPI: If an ACPI driver is available for this device,
>>>>>>> you should use it instead of the native driver
>>>>>>> [ 15.729263] ACPI Warning: 0x00000000000008b0-0x00000000000008bf
>>>>>>> SystemIO conflicts with Region \GIC2 1 (20131115/utaddress-251)
>>>>>>> [ 15.729266] ACPI: If an ACPI driver is available for this device,
>>>>>>> you should use it instead of the native driver
>>>>>>> [ 15.729268] ACPI Warning: 0x0000000000000880-0x00000000000008af
>>>>>>> SystemIO conflicts with Region \GIC1 1 (20131115/utaddress-251)
>>>>>>> [ 15.729270] ACPI: If an ACPI driver is available for this device,
>>>>>>> you should use it instead of the native driver
>>>>>>> [ 15.729272] lpc_ich: Resource conflict(s) found affecting gpio_ich
>>>>>>> [ 15.747472] cfg80211: Calling CRDA to update world regulatory
>>>>>>> domain
>>>>>>> [ 15.794599] lp0: using parport0 (interrupt-driven).
>>>>>>> [ 15.824809] kvm: disabled by bios
>>>>>>> [ 15.872017] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset
>>>>>>> 5392, rev 0223 detected
>>>>>>> [ 15.881957] ieee80211 phy0: rt2800_init_eeprom: Error - Invalid
>>>>>>> RF chipset 0x5362 detected
>>>>>>> [ 15.881961] ieee80211 phy0: rt2x00lib_probe_dev: Error - Failed
>>>>>>> to allocate device
>>>>>>>
>>>>>>> --
>>>>>>> :-)~MIKE~(-:
>>>>>>>
>>>>>>> ---------------------------------------------------
>>>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> James McPhee
>>>>>> jmcphe at gmail.com
>>>>>>
>>>>>> ---------------------------------------------------
>>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> :-)~MIKE~(-:
>>>>>
>>>>> ---------------------------------------------------
>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> James McPhee
>>>> jmcphe at gmail.com
>>>>
>>>> ---------------------------------------------------
>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>
>>>
>>>
>>>
>>> --
>>> :-)~MIKE~(-:
>>>
>>> ---------------------------------------------------
>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>> To subscribe, unsubscribe, or to change your mail settings:
>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>
>>
>>
>>
>> --
>> James McPhee
>> jmcphe at gmail.com
>>
>> ---------------------------------------------------
>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>> To subscribe, unsubscribe, or to change your mail settings:
>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>
>
>
>
> --
> :-)~MIKE~(-:
>
--
:-)~MIKE~(-:
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20171122/63348f69/attachment.html>
More information about the PLUG-discuss
mailing list