attach XP computer to network fror printing
Michael Havens
bmike1 at gmail.com
Tue Mar 13 22:36:52 MST 2012
I've never run testparm before. Did I do that correctly (a)? It doesn't say
anything is malformed or anything like that so I suppose it is all good
now! What can I run testparm against, is it just a smb.conf thing?
Unfortunately it still isn't printing.
-a-
bmike1 at Michaels-PC:~$ testparm /etc/samba/smb.conf
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Processing section "[printers]"
Processing section "[print$]"
Loaded services file OK.
Server role: ROLE_STANDALONE
Press enter to see a dump of your service definitions
[global]
server string = %h server (Samba, Ubuntu)
interfaces = 192.168.0.2/24, eth0
map to guest = Bad User
obey pam restrictions = Yes
pam password change = Yes
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n
*Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
unix password sync = Yes
syslog = 0
log file = /var/log/samba/log.%m
max log size = 1000
smb ports = 137 138 139 445
dns proxy = No
usershare allow guests = Yes
panic action = /usr/share/samba/panic-action %d
[printers]
comment = All Printers
path = /var/spool/samba
create mask = 0700
printable = Yes
browseable = No
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
bmike1 at Michaels-PC:~$
On Tue, Mar 13, 2012 at 5:02 PM, James Mcphee <jmcphe at gmail.com> wrote:
> testparm says the interface line is malformed. Always run testparm after
> making a change to make sure the config is at least readable.
>
>
> On Tue, Mar 13, 2012 at 4:52 PM, Michael Havens <bmike1 at gmail.com> wrote:
>
>> well thank you very much! Unfortunately it didn't help any.
>>
>> look at my smb.conf file and see if that is messed up: (I added the ip
>> addr in networking)
>>
>> #======================= Global Settings =======================
>> [global]
>> #opening ports for printer
>> smb ports = 137 138 139 445
>> ## Browsing/Identification ###
>> # Change this to the workgroup/NT-domain name your Samba server will part
>> of
>> workgroup = WORKGROUP
>> # server string is the equivalent of the NT Description field
>> server string = %h server (Samba, Ubuntu)
>> # Windows Internet Name Serving Support Section:
>> # WINS Support - Tells the NMBD component of Samba to enable its WINS
>> Server
>> # wins support = no
>> # WINS Server - Tells the NMBD components of Samba to be a WINS Client
>> # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
>> ; wins server = w.x.y.z
>> # This will prevent nmbd to search for NetBIOS names through DNS.
>> dns proxy = no
>> # What naming service and in what order should we use to resolve host
>> names
>> # to IP addresses
>> ; name resolve order = lmhosts host wins bcast
>> #### Networking ####
>> # The specific set of interfaces / networks to bind to
>> # This can be either the interface name or an IP address/netmask;
>> # interface names are normally preferred
>> ; interfaces = 127.0.0.0/8 eth0
>> interface 192.168.0.2/24 eth0
>> # Only bind to the named interfaces and/or networks; you must use the
>> # 'interfaces' option above to use this.
>> # It is recommended that you enable this feature if your Samba machine is
>> # not protected by a firewall or is a firewall itself. However, this
>> # option cannot handle dynamic or non-broadcast interfaces correctly.
>> ; bind interfaces only = yes
>> #### Debugging/Accounting ####
>> # This tells Samba to use a separate log file for each machine
>> # that connects
>> log file = /var/log/samba/log.%m
>> # Cap the size of the individual log files (in KiB).
>> max log size = 1000
>> # If you want Samba to only log through syslog then set the following
>> # parameter to 'yes'.
>> # syslog only = no
>> # We want Samba to log a minimum amount of information to syslog.
>> Everything
>> # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
>> # through syslog you should set the following parameter to something
>> higher.
>> syslog = 0
>> # Do something sensible when Samba crashes: mail the admin a backtrace
>> panic action = /usr/share/samba/panic-action %d
>> ####### Authentication #######
>> # "security = user" is always a good idea. This will require a Unix
>> account
>> # in this server for every user accessing the server. See
>> # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
>> # in the samba-doc package for details.
>> # security = user
>> # You may wish to use password encryption. See the section on
>> # 'encrypt passwords' in the smb.conf(5) manpage before enabling.
>> encrypt passwords = true
>> # If you are using encrypted passwords, Samba will need to know what
>> # password database type you are using.
>> passdb backend = tdbsam
>> obey pam restrictions = yes
>> # This boolean parameter controls whether Samba attempts to sync the Unix
>> # password with the SMB password when the encrypted SMB password in the
>> # passdb is changed.
>> unix password sync = yes
>> # For Unix password sync to work on a Debian GNU/Linux system, the
>> following
>> # parameters must be set (thanks to Ian Kahan <<
>> kahan at informatik.tu-muenchen.de> for
>> # sending the correct chat script for the passwd program in Debian Sarge).
>> passwd program = /usr/bin/passwd %u
>> passwd chat = *Enter\snew\s*\spassword:* %n\n
>> *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
>> # This boolean controls whether PAM will be used for password changes
>> # when requested by an SMB client instead of the program listed in
>> # 'passwd program'. The default is 'no'.
>> pam password change = yes
>> # This option controls how unsuccessful authentication attempts are mapped
>> # to anonymous connections
>> map to guest = bad user
>> ########## Domains ###########
>> # Is this machine able to authenticate users. Both PDC and BDC
>> # must have this setting enabled. If you are the BDC you must
>> # change the 'domain master' setting to no
>> #
>> ; domain logons = yes
>> #
>> # The following setting only takes effect if 'domain logons' is set
>> # It specifies the location of the user's profile directory
>> # from the client point of view)
>> # The following required a [profiles] share to be setup on the
>> # samba server (see below)
>> ; logon path = \\%N\profiles\%U
>> # Another common choice is storing the profile in the user's home
>> directory
>> # (this is Samba's default)
>> # logon path = \\%N\%U\profile
>> # The following setting only takes effect if 'domain logons' is set
>> # It specifies the location of a user's home directory (from the client
>> # point of view)
>> ; logon drive = H:
>> # logon home = \\%N\%U
>> # The following setting only takes effect if 'domain logons' is set
>> # It specifies the script to run during logon. The script must be stored
>> # in the [netlogon] share
>> # NOTE: Must be store in 'DOS' file format convention
>> ; logon script = logon.cmd
>> # This allows Unix users to be created on the domain controller via the
>> SAMR
>> # RPC pipe. The example command creates a user account with a disabled
>> Unix
>> # password; please adapt to your needs
>> ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos
>> "" %u
>> # This allows machine accounts to be created on the domain controller via
>> the
>> # SAMR RPC pipe.
>> # The following assumes a "machines" group exists on the system
>> ; add machine script = /usr/sbin/useradd -g machines -c "%u machine
>> account" -d /var/lib/samba -s /bin/false %u
>> # This allows Unix groups to be created on the domain controller via the
>> SAMR
>> # RPC pipe.
>> ; add group script = /usr/sbin/addgroup --force-badname %g
>> ########## Printing ##########
>> # If you want to automatically load your printer list rather
>> # than setting them up individually then you'll need this
>> # load printers = yes
>> # lpr(ng) printing. You may wish to override the location of the
>> # printcap file
>> ; printing = bsd
>> ; printcap name = /etc/printcap
>> # CUPS printing. See also the cupsaddsmb(8) manpage in the
>> # cupsys-client package.
>> ; printing = cups
>> ; printcap name = cups
>> ############ Misc ############
>> # Using the following line enables you to customise your configuration
>> # on a per machine basis. The %m gets replaced with the netbios name
>> # of the machine that is connecting
>> ; include = /home/samba/etc/smb.conf.%m
>> # Most people will find that this option gives better performance.
>> # See smb.conf(5) and
>> /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
>> # for details
>> # You may want to add the following on a Linux system:
>> # SO_RCVBUF=8192 SO_SNDBUF=8192
>> # socket options = TCP_NODELAY
>> # The following parameter is useful only if you have the linpopup package
>> # installed. The samba maintainer and the linpopup maintainer are
>> # working to ease installation and configuration of linpopup and samba.
>> ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
>> # Domain Master specifies Samba to be the Domain Master Browser. If this
>> # machine will be configured as a BDC (a secondary logon server), you
>> # must set this to 'no'; otherwise, the default behavior is recommended.
>> # domain master = auto
>> # Some defaults for winbind (make sure you're not using the ranges
>> # for something else.)
>> ; idmap uid = 10000-20000
>> ; idmap gid = 10000-20000
>> ; template shell = /bin/bash
>> # The following was the default behaviour in sarge,
>> # but samba upstream reverted the default because it might induce
>> # performance issues in large organizations.
>> # See Debian bug #368251 for some of the consequences of *not*
>> # having this setting and smb.conf(5) for details.
>> ; winbind enum groups = yes
>> ; winbind enum users = yes
>> # Setup usershare options to enable non-root users to share folders
>> # with the net usershare command.
>>
>> # Maximum number of usershare. 0 (default) means that usershare is
>> disabled.
>> ; usershare max shares = 100
>>
>> # Allow users who've been granted usershare privileges to create
>> # public shares, not just authenticated ones
>> usershare allow guests = yes
>>
>> #======================= Share Definitions =======================
>>
>> # Un-comment the following (and tweak the other settings below to suit)
>> # to enable the default home directory shares. This will share each
>> # user's home director as \\server\username
>> ;[homes]
>> ; comment = Home Directories
>> ; browseable = no
>>
>> # By default, the home directories are exported read-only. Change the
>> # next parameter to 'no' if you want to be able to write to them.
>> ; read only = yes
>>
>> # File creation mask is set to 0700 for security reasons. If you want to
>> # create files with group=rw permissions, set next parameter to 0775.
>> ; create mask = 0700
>>
>> # Directory creation mask is set to 0700 for security reasons. If you
>> want to
>> # create dirs. with group=rw permissions, set next parameter to 0775.
>> ; directory mask = 0700
>>
>> # By default, \\server\username shares can be connected to by anyone
>> # with access to the samba server. Un-comment the following parameter
>> # to make sure that only "username" can connect to \\server\username
>> # The following parameter makes sure that only "username" can connect
>> #
>> # This might need tweaking when using external authentication schemes
>> ; valid users = %S
>>
>> # Un-comment the following and create the netlogon directory for Domain
>> Logons
>> # (you need to configure Samba to act as a domain controller too.)
>> ;[netlogon]
>> ; comment = Network Logon Service
>> ; path = /home/samba/netlogon
>> ; guest ok = yes
>> ; read only = yes
>>
>> # Un-comment the following and create the profiles directory to store
>> # users profiles (see the "logon path" option above)
>> # (you need to configure Samba to act as a domain controller too.)
>> # The path below should be writable by all users so that their
>> # profile directory may be created the first time they log on
>> ;[profiles]
>> ; comment = Users profiles
>> ; path = /home/samba/profiles
>> ; guest ok = no
>> ; browseable = no
>> ; create mask = 0600
>> ; directory mask = 0700
>>
>> [printers]
>> comment = All Printers
>> browseable = no
>> path = /var/spool/samba
>> printable = yes
>> guest ok = no
>> read only = yes
>> create mask = 0700
>>
>> # Windows clients look for this share name as a source of downloadable
>> # printer drivers
>> [print$]
>> comment = Printer Drivers
>> path = /var/lib/samba/printers
>> browseable = yes
>> read only = yes
>> guest ok = no
>> # Uncomment to allow remote administration of Windows print drivers.
>> # You may need to replace 'lpadmin' with the name of the group your
>> # admin users are members of.
>> # Please note that you also need to set appropriate Unix permissions
>> # to the drivers directory for these users to have write rights in it
>> ; write list = root, @lpadmin
>>
>> # A sample share for sharing your CD-ROM with others.
>> ;[cdrom]
>> ; comment = Samba server's CD-ROM
>> ; read only = yes
>> ; locking = no
>> ; path = /cdrom
>> ; guest ok = yes
>>
>> # The next two parameters show how to auto-mount a CD-ROM when the
>> # cdrom share is accesed. For this to work /etc/fstab must contain
>> # an entry like this:
>> #
>> # /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
>> #
>> # The CD-ROM gets unmounted automatically after the connection to the
>> #
>> # If you don't want to use auto-mounting/unmounting make sure the CD
>> # is mounted on /cdrom
>> #
>> ; preexec = /bin/mount /cdrom
>> ; postexec = /bin/umount /cdrom
>>
>>
>>
>>
>> On Tue, Mar 13, 2012 at 3:42 PM, James Mcphee <jmcphe at gmail.com> wrote:
>>
>>> /etc/init.d/nmbd
>>> /etc/init.d/smbd
>>>
>>>
>>> So not smb, but smbd and nmbd if you want the name services.
>>>
>>>
>>>
>>> On Tue, Mar 13, 2012 at 1:25 AM, Michael Havens <bmike1 at gmail.com>wrote:
>>>
>>>> You know, I said that I think we found the problem. Unfortunately, that
>>>> doesn't mean I know how to fix it. Can you let me know that?
>>>>
>>>> On Mon, Mar 12, 2012 at 10:44 AM, Michael Havens <bmike1 at gmail.com>wrote:
>>>>
>>>>> I think we just found the problem!
>>>>> y, that doesn't mean I kn ow how to fi
>>>>>
>>>>> On Mon, Mar 12, 2012 at 10:43 AM, Michael Havens <bmike1 at gmail.com>
>>>>> wrote:
>>>>> > hmmmmm I was going to try it both ways but when I type in 'sudo
>>>>> > service smb restart' the response is 'unrecognized service'. I then
>>>>> > checked to make sure samba was started (sudo service smb start) but
>>>>> > got the same response. Then I made sure it was installed (apt-get
>>>>> > install) but it is at the newest version. What gives?
>>>>> >
>>>>> > On Mon, Mar 12, 2012 at 10:16 AM, Michael Havens <bmike1 at gmail.com>
>>>>> wrote:
>>>>> >>
>>>>> >> type in 'smb ports=139 445'? or w/o the 'smb'?
>>>>> >>
>>>>> >>
>>>>> >> On Mon, Mar 12, 2012 at 10:07 AM, James Mcphee <jmcphe at gmail.com>
>>>>> wrote:
>>>>> >>>
>>>>> >>> Add smb ports=139 445 to your smb.conf.
>>>>> >>>
>>>>> >>> On Mon Mar 12, 2012 at 9:56 AM, Michael Havens <bmike1 at gmail.com>
>>>>> wrote:
>>>>> >>>>
>>>>> >>>> I'll make the backup but what do I add?
>>>>> >>>>
>>>>> >>>>
>>>>> >>>>
>>>>> >>>> On Mon, Mar 12, 2012 at 9:33 AM, James Mcphee <jmcphe at gmail.com>
>>>>> wrote:
>>>>> >>>>>
>>>>> >>>>> You would add it to the [global] section of the smb.conf. It's
>>>>> a hairy config to edit, so be sure to run testparm on it to make sure it
>>>>> works before restarting. And make backups!
>>>>> >>>>>
>>>>> >>>>>
>>>>> >>>>> On Sun, Mar 11, 2012 at 9:21 PM, Michael Havens <
>>>>> bmike1 at gmail.com> wrote:
>>>>> >>>>>>
>>>>> >>>>>> This must be text I have to add because I don't see anywhere
>>>>> in smb.conf that I can add the ports. Sorry but I need to know what to type
>>>>> in.
>>>>> >>>>>>
>>>>> >>>>>>
>>>>> >>>>>> On Sun, Mar 11, 2012 at 8:53 PM, James Mcphee <jmcphe at gmail.com>
>>>>> wrote:
>>>>> >>>>>>>
>>>>> >>>>>>> Add smb ports=139 445 to your smb.conf. It "might" work :)
>>>>> >>>>>>>
>>>>> >>>>>>>
>>>>> >>>>>>> On Sun, Mar 11, 2012 at 8:38 PM, Michael Havens <
>>>>> bmike1 at gmail.com> wrote:
>>>>> >>>>>>>>
>>>>> >>>>>>>> okay james..... I am figuing that this is done at.... I've
>>>>> been looking for how to this for A while now. How do you do it? There it
>>>>> is. I found a GUI app that did it called 'firestarter'. Unfortunately
>>>>> opening the ports didn't help the situation any. ports 137-139 and 445 are
>>>>> now open.
>>>>> >>>>>>>>
>>>>> >>>>>>>>
>>>>> >>>>>>>> On Sun, Mar 11, 2012 at 6:50 PM, James Mcphee <
>>>>> jmcphe at gmail.com> wrote:
>>>>> >>>>>>>>>
>>>>> >>>>>>>>> The error pasted is about name services, not printing. XP
>>>>> being XP, have you tried setting the samba box up for port 139 instead of
>>>>> 445?
>>>>> >>>>>>>>>
>>>>> >>>>>>>>>
>>>>> >>>>>>>>> On Sun, Mar 11, 2012 at 4:33 PM, Michael Havens <
>>>>> bmike1 at gmail.com> wrote:
>>>>> >>>>>>>>>>
>>>>> >>>>>>>>>> it isn't fixed.
>>>>> >>>>>>>>>>
>>>>> >>>>>>>>>>
>>>>> >>>>>>>>>> On Sun, Mar 11, 2012 at 4:19 PM, Lisa Kachold <
>>>>> lisakachold at obnosis.com> wrote:
>>>>> >>>>>>>>>>>
>>>>> >>>>>>>>>>> Glad the Plug could fix it!
>>>>> >>>>>>>>>>>
>>>>> >>>>>>>>>>> On 6 Mar 2012 18:51, "Michael Havens" <bmike1 at gmail.com>
>>>>> wrote:
>>>>> >>>>>>>>>>>>
>>>>> >>>>>>>>>>>> okay.... I enabled the guest account but that didn't
>>>>> improve the situation any. I checked localhost:631 and the printer is
>>>>> listed. (weird thing, from the laptop it is listed as a different model. It
>>>>> works so I don't really care)
>>>>> >>>>>>>>>>>>
>>>>> >>>>>>>>>>>> ====
>>>>> >>>>>>>>>>>> 1) As you initially asked, your XP account name was
>>>>> changed. Please refer to the enabling of the guest account HowTo in:
>>>>> http://unixwiz.net/techtips/samba-xp-printing.html NOTE: I am
>>>>> assuming that these machines are protected inside your network, since it's
>>>>> usually a BAD IDEA to enable the guest account otherwise. Verify your
>>>>> WORKGROUP and NetBIOS name in XP.
>>>>> >>>>>>>>>>>>
>>>>> >>>>>>>>>>>> Please, then, attempt to connect from XP and tail the log
>>>>> and see what Samba is whining about?
>>>>> >>>>>>>>>>>>
>>>>> >>>>>>>>>>>> ====
>>>>> >>>>>>>>>>>> Not sure of the logs name. Can you help me out? I also
>>>>> don't know about the net
>>>>> >>>>>>>>>>>> --
>>>>> >>>>>>>>>>>> :-)~MIKE~(-:
>>>>> >>>>>>>>>>>>
>>>>> >>>>>>>>>>>> ---------------------------------------------------
>>>>> >>>>>>>>>>>> PLUG-discuss mailing list -
>>>>> PLUG-discuss at lists.plug.phoenix.az.us
>>>>> >>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail
>>>>> settings:
>>>>> >>>>>>>>>>>>
>>>>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>>>> >>>>>>>>>>>
>>>>> >>>>>>>>>>>
>>>>> >>>>>>>>>>> ---------------------------------------------------
>>>>> >>>>>>>>>>> PLUG-discuss mailing list -
>>>>> PLUG-discuss at lists.plug.phoenix.az.us
>>>>> >>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>> >>>>>>>>>>>
>>>>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>>>> >>>>>>>>>>
>>>>> >>>>>>>>>>
>>>>> >>>>>>>>>>
>>>>> >>>>>>>>>>
>>>>> >>>>>>>>>> --
>>>>> >>>>>>>>>> :-)~MIKE~(-:
>>>>> >>>>>>>>>>
>>>>> >>>>>>>>>> ---------------------------------------------------
>>>>> >>>>>>>>>> PLUG-discuss mailing list -
>>>>> PLUG-discuss at lists.plug.phoenix.az.us
>>>>> >>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>> >>>>>>>>>>
>>>>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>>>> >>>>>>>>>
>>>>> >>>>>>>>>
>>>>> >>>>>>>>>
>>>>> >>>>>>>>>
>>>>> >>>>>>>>> --
>>>>> >>>>>>>>> James McPhee
>>>>> >>>>>>>>> jmcphe at gmail.com
>>>>> >>>>>>>>>
>>>>> >>>>>>>>> ---------------------------------------------------
>>>>> >>>>>>>>> PLUG-discuss mailing list -
>>>>> PLUG-discuss at lists.plug.phoenix.az.us
>>>>> >>>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>> >>>>>>>>>
>>>>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>>>> >>>>>>>>
>>>>> >>>>>>>>
>>>>> >>>>>>>>
>>>>> >>>>>>>>
>>>>> >>>>>>>> --
>>>>> >>>>>>>> :-)~MIKE~(-:
>>>>> >>>>>>>>
>>>>> >>>>>>>> ---------------------------------------------------
>>>>> >>>>>>>> PLUG-discuss mailing list -
>>>>> PLUG-discuss at lists.plug.phoenix.az.us
>>>>> >>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>> >>>>>>>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>>>> >>>>>>>
>>>>> >>>>>>>
>>>>> >>>>>>>
>>>>> >>>>>>>
>>>>> >>>>>>> --
>>>>> >>>>>>> James McPhee
>>>>> >>>>>>> jmcphe at gmail.com
>>>>> >>>>>>>
>>>>> >>>>>>> ---------------------------------------------------
>>>>> >>>>>>> PLUG-discuss mailing list -
>>>>> PLUG-discuss at lists.plug.phoenix.az.us
>>>>> >>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>> >>>>>>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>>>> >>>>>>
>>>>> >>>>>>
>>>>> >>>>>>
>>>>> >>>>>>
>>>>> >>>>>> --
>>>>> >>>>>> :-)~MIKE~(-:
>>>>> >>>>>>
>>>>> >>>>>> ---------------------------------------------------
>>>>> >>>>>> PLUG-discuss mailing list -
>>>>> PLUG-discuss at lists.plug.phoenix.az.us
>>>>> >>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>> >>>>>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>>>> >>>>>
>>>>> >>>>>
>>>>> >>>>>
>>>>> >>>>>
>>>>> >>>>> --
>>>>> >>>>> James McPhee
>>>>> >>>>> jmcphe at gmail.com
>>>>> >>>>>
>>>>> >>>>> ---------------------------------------------------
>>>>> >>>>> PLUG-discuss mailing list -
>>>>> PLUG-discuss at lists.plug.phoenix.az.us
>>>>> >>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>> >>>>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>>>> >>>>
>>>>> >>>>
>>>>> >>>>
>>>>> >>>>
>>>>> >>>> --
>>>>> >>>> :-)~MIKE~(-:
>>>>> >>>>
>>>>> >>>> ---------------------------------------------------
>>>>> >>>> PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
>>>>> >>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>> >>>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>>>> >>>
>>>>> >>>
>>>>> >>>
>>>>> >>>
>>>>> >>> --
>>>>> >>> James McPhee
>>>>> >>> jmcphe at gmail.com
>>>>> >>>
>>>>> >>> ---------------------------------------------------
>>>>> >>> PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
>>>>> >>> To subscribe, unsubscribe, or to change your mail settings:
>>>>> >>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>>>> >>
>>>>> >>
>>>>> >>
>>>>> >>
>>>>> >> --
>>>>> >> :-)~MIKE~(-:
>>>>> >
>>>>> >
>>>>> >
>>>>> >
>>>>> > --
>>>>> > :-)~MIKE~(-:
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> :-)~MIKE~(-:
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> :-)~MIKE~(-:
>>>>
>>>> ---------------------------------------------------
>>>> PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>>>
>>>
>>>
>>>
>>> --
>>> James McPhee
>>> jmcphe at gmail.com
>>>
>>> ---------------------------------------------------
>>> PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
>>> To subscribe, unsubscribe, or to change your mail settings:
>>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>>
>>
>>
>>
>> --
>> :-)~MIKE~(-:
>>
>> ---------------------------------------------------
>> PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
>> To subscribe, unsubscribe, or to change your mail settings:
>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>
>
>
>
> --
> James McPhee
> jmcphe at gmail.com
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
--
:-)~MIKE~(-:
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.PLUG.phoenix.az.us/pipermail/plug-discuss/attachments/20120313/06d7599d/attachment.html>
More information about the PLUG-discuss
mailing list