Need topic for tomorrow!

[alexanderhenry at cox.net]

bah I made a mistake.  Here at work I just found the same kind of board I have at home.  By default it only comes with 2 USB's and an ethernet jack, and an SD card slot.  The dev kit has a daughter card which gives you RS232, and if you want more you have to wire up the DIO's yourself.

Still gives us a lot of potential to occupy at least an hour, though, it's just a matter of with what kind of material.  I'll report back here before 9pm tonight.


---- alexanderhenry at cox.net wrote: 
> LOL, thought I made this clear...  I haven't done anything with the board, I don't know about drivers and 232's.  I have worked much with a sister-product to this board, mostly administration of a new Linux system and developing in CGI-C on it.  There should be a default busybox install on it from the factory.   I could come in early so we could slap something together, making sure I can boot the board, minicom in, and maaaaybe make sure a cross-compiler works from my laptop (it's an iBook G4!), tonight.
> 
> Given this, what could we present?  Make an appliance that makes two lights blink from the USB's?  It would cover the basics of what busybox and cross compiling and drivers are about.
> 
> 
> 
> > That would be very a very good topic.  If you bring the hardware, are
> > you going to demo it?  Would you like to present it?
> > 
> > On Wed, Aug 6, 2008 at 11:42 AM,  <alexanderhenry at cox.net> wrote:
> > >
> > > Embedded Linux howto?  Device drivers and bit-banging on RS-232/485?
> > >
> > > I'm kinda thinking only of what I'd like to learn myself as well as burdening Alan with that suggestion, so I'm hoping there are other presenters as well as good interest.
> > >
> > > I have a single-board ARM with dev toolkit that has been sitting on a shelf forever...  It's got USB, ethernet, and RS485 ports.  At least I could bring that to the table, if that's at all practical.  If I know by today's end that this could be used I'll at least see if I can boot and minicom into it tonight.
> > >
> > > If anyone has a simple device that can be wired to a 5V signal or COM port or USB, that could give us some direction.
> > >
> > >
> > >
> > > ---- Alan Dayley <adayley at gmail.com> wrote:
> > >> We have a Devel meeting scheduled for tomorrow but I have not rustled
> > >> up a topic yet.  Does anyone have a topic they'd like to suggest or,
> > >> better yet, present?
> > >>
> > >> Alan
> > >> ---------------------------------------------------
> > >> PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
> > >> To subscribe, unsubscribe, or to change your mail settings:
> > >> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> > >
> > > ---------------------------------------------------
> > > PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
> > > To subscribe, unsubscribe, or to change your mail settings:
> > > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> > >
> > ---------------------------------------------------
> > PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
> > To subscribe, unsubscribe, or to change your mail settings:
> > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> 
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss