manual Cox cable config
Stan Harder
plug-discuss@lists.plug.phoenix.az.us
23 Jan 2002 07:02:58 -0700
--=-6yseGvEsyv7D4KUVDBB4
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
My understanding is that you only needed the old CX name during the
conversion. It won't be needed any longer, beyond that point. I don't
recall if I read that in their lit. or where. As for specifying name
servers, that should all come in the DHCP package. Their instructions
are to just set your machine to DHCP and it will get all the other stuff
from their DHCP server - normal procedure.
I got switched to a new IP (on the cox.net) last week without notice.
Just came home and found out the IP had changed. So, last night I went
into Cox's support.cox.net pages, entered my auth #, did the mandatory
password change, and everything's hunky dory.
Interesting thing is that it seems SSH isn't working inbound. Had
someone test SSH to my box and couldn't connect. It would seem they
aren't allowing that port. Anyone run into this? I know SSH is running
on the box in question. Took down the firewall for a bit to make sure it
wasn't a local firewall problem. No dice.
On Mon, 2002-01-21 at 13:04, Ward Brady wrote:
I made the conversion this morning and while almost everything "seems to
be" working I was wondering if anyone could answer a couple of
questions.
It seems that the old host names will continue to work i.e. CXxxxxxx-x.
Is that correct. Or can they now also be changed?
How about domain names? My old name would have been
CXxxxxxx-x@chdn1.az.home.com. What is the new domain name?
Is the resolve.conf file to be "deleted". I assume we are no longer
to specify nameservers.
________________________________________________
See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't post to the list quickly and you use Netscape to write mail.
PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
Stan Harder
stan@smharder.com
stan and marianne's website
--=-6yseGvEsyv7D4KUVDBB4
Content-Type: text/html; charset=utf-8
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/1.0.0">
</HEAD>
<BODY>
My understanding is that you only needed the old CX name during the conversion. It won't be needed any longer, beyond that point. I don't recall if I read that in their lit. or where. As for specifying name servers, that should all come in the DHCP package. Their instructions are to just set your machine to DHCP and it will get all the other stuff from their DHCP server - normal procedure.
<BR>
<BR>
I got switched to a new IP (on the cox.net) last week without notice. Just came home and found out the IP had changed. So, last night I went into Cox's support.cox.net pages, entered my auth #, did the mandatory password change, and everything's hunky dory.
<BR>
<BR>
Interesting thing is that it seems SSH isn't working inbound. Had someone test SSH to my box and couldn't connect. It would seem they aren't allowing that port. Anyone run into this? I know SSH is running on the box in question. Took down the firewall for a bit to make sure it wasn't a local firewall problem. No dice.
<BR>
<BR>
<BR>
On Mon, 2002-01-21 at 13:04, Ward Brady wrote:
<BLOCKQUOTE>
<PRE><FONT COLOR="#737373"><FONT SIZE="3"><I>I made the conversion this morning and while almost everything "seems to</FONT></FONT></I>
<FONT COLOR="#737373"><FONT SIZE="3"><I>be" working I was wondering if anyone could answer a couple of</FONT></FONT></I>
<FONT COLOR="#737373"><FONT SIZE="3"><I>questions.</FONT></FONT></I>
<FONT COLOR="#737373"><FONT SIZE="3"><I></FONT></FONT></I>
<FONT COLOR="#737373"><FONT SIZE="3"><I>It seems that the old host names will continue to work i.e. CXxxxxxx-x.</FONT></FONT></I>
<FONT COLOR="#737373"><FONT SIZE="3"><I>Is that correct. Or can they now also be changed?</FONT></FONT></I>
<FONT COLOR="#737373"><FONT SIZE="3"><I></FONT></FONT></I>
<FONT COLOR="#737373"><FONT SIZE="3"><I>How about domain names? My old name would have been</FONT></FONT></I>
<FONT COLOR="#737373"><FONT SIZE="3"><I>CXxxxxxx-x@chdn1.az.home.com. What is the new domain name?</FONT></FONT></I>
<FONT COLOR="#737373"><FONT SIZE="3"><I></FONT></FONT></I>
<FONT COLOR="#737373"><FONT SIZE="3"><I>Is the resolve.conf file to be "deleted". I assume we are no longer</FONT></FONT></I>
<FONT COLOR="#737373"><FONT SIZE="3"><I>to specify nameservers.</FONT></FONT></I>
<FONT COLOR="#737373"><FONT SIZE="3"><I></FONT></FONT></I>
<FONT COLOR="#737373"><FONT SIZE="3"><I>________________________________________________</FONT></FONT></I>
<FONT COLOR="#737373"><FONT SIZE="3"><I>See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't post to the list quickly and you use Netscape to write mail.</FONT></FONT></I>
<FONT COLOR="#737373"><FONT SIZE="3"><I></FONT></FONT></I>
<FONT COLOR="#737373"><FONT SIZE="3"><I>PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us</FONT></FONT></I></PRE>
</BLOCKQUOTE>
<A HREF="http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss"><FONT SIZE="3"><I>http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss</FONT></I></A>
<TABLE CELLSPACING="0" CELLPADDING="0" WIDTH="100%">
<TR>
<TD>
Stan Harder
<BR>
<A HREF="mailto:stan@smharder.com"><FONT SIZE="3"><I>stan@smharder.com</FONT></I></A>
<BR>
<A HREF="www.smharder.com"><FONT SIZE="3"><I>stan and marianne's website</FONT></I></A>
</TD>
</TR>
</TABLE>
</BODY>
</HTML>
--=-6yseGvEsyv7D4KUVDBB4--