NIC

[Patrick Fleming]

On Thu, 18 Oct 2001, jtannenba wrote:

> Ok, yes, I recompiled the tulip.c file that came on
> the floppy with the card.
> Same error.
And copied the resulting tulip.o file to 
/lib/modules/{version}/kernel/drivers/net/tulip/

Here's what my /etc/sysconfig/network-scripts/ifcfg-eth0 file looks like:

DEVICE=eth0
BOOTPROTO=static
BROADCAST=
IPADDR=192.168.1.1
NETMASK=255.255.255.0
NETWORK=192.168.1.0
ONBOOT=yes


> No ifconfig does not show eth0
> The messages file did not show an error.
> the modprobe tulip.o said 'invalid irq'
> and the documentation says what I have in
> /proc/pci shows my pci mb setup is wrong?? It is

Not sure what you mean by the docs show that /proc/pci is wrong.

> all automatic. (set to auto)????
> Joe
> --- Patrick Fleming <pfleming@infomagic.net> wrote:
> > 
> > Did you compile the tulip driver yourself? What does
> > /var/log/messages
> > indicate? Do you have the file
> > /etc/sysconfig/network-scripts/ifcfg-eth0 ?
> > 
> > Patrick
> > 
> > On Mon, 15 Oct 2001, jtannenba wrote:
> > 
> > > Hi all,
> > >
> > > Finally got broadband and am getting off of a
> > dialup
> > > modem..
> > >
> > > Problem, have a Linksys lne100tx pci card and put
> > it
> > > in the box.  Windows works fine.
> > >
> > > My Redhat 6.1, however, found  a card but didn't
> > > recognize what kind.
> > >
> > > I did the config asked by the Readme.txt file
> > (uses
> > > the
> > > tulip.o driver), but when I go to activate eth0,
> > > it says 'delaying eth0 initialization.'  I am out
> > of
> > > ideas.  An ifconfig does not show eth0 either.
> > >
> > > Joe
> > >
> > > =====
> > > JT and NE Tannenbaum
> > > jtannenba@yahoo.com
> > > ________________________________________________
> > > See http://PLUG.phoenix.az.us/navigator-mail.shtml
> > if your mail doesn't post to the list quickly and
> > you use Netscape to write mail.
> > >
> > > PLUG-discuss mailing list  - 
> > PLUG-discuss@lists.PLUG.phoenix.az.us
> > >
> >
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> > >
> > 
> > ________________________________________________
> > See http://PLUG.phoenix.az.us/navigator-mail.shtml
> > if your mail doesn't post to the list quickly and
> > you use Netscape to write mail.
> > 
> > PLUG-discuss mailing list  - 
> > PLUG-discuss@lists.PLUG.phoenix.az.us
> >
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> 
> 
> =====
> JT and NE Tannenbaum
> jtannenba@yahoo.com
> ________________________________________________
> See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't post to the list quickly and you use Netscape to write mail.
> 
> PLUG-discuss mailing list  -  PLUG-discuss@lists.PLUG.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>