Kernel panic!

[Mark Peoples]

WDCs rock. Got 6 of 'em.

Almost as cool as my Seagate Cheetah fibres. Well, when I finish my
'project', they will be.  =)

-----Original Message-----
From: plug-discuss-admin@lists.PLUG.phoenix.az.us
[mailto:plug-discuss-admin@lists.PLUG.phoenix.az.us]On Behalf Of John W
Sent: Saturday, October 07, 2000 9:17 AM
To: plug-discuss@lists.PLUG.phoenix.az.us
Subject: Re: Kernel panic!


I think I may just avoid hdparm customizing in light of what has
happened. I like Linux alot better when it is working! I have a new
Western digital Caviar WD153ba 7200rpm.
http://www.westerndigital.com/products/drives/wd153ba-c.html. I really
don,t know what I am missing with all the hdparm tweaks so it doesn't
bother me that much. I know having an angry filesystem is no fun.
----- Original Message -----
From: "Jason" <jkenner@mindspring.com>
To: <plug-discuss@lists.PLUG.phoenix.az.us>
Sent: Saturday, October 07, 2000 3:03 AM
Subject: Re: Kernel panic!


> Bill Warner wrote:
> >
> > also check /proc/partitions to see what might be showing up there.
> >
> > Bill Warner
> >
> > > Am 05. Oct, 2000 schwäzte John W so:
> > >
> > > > Tried fdisk /dev/hda and response was could not open /dev/hda.
I tried
> > > > cfdisk and the command was not available. I don't want to
reinstall
> > > > but if I have it is no big deal. I don't understand why hdparm
had
> > > > such adverse effects on RH7.0 when it did what I wanted in
6.2.
> > >
> > > I'd suggest looking for an hdparm mailing list and searching it.
Maybe the
> > > same with an ext2 list. It's a great opportunity to learn a lot
about
> > > filesystems, ide disk drives and data recovery ;-).
>
> If the error he's getting is what I think it is, the fs may as well
be
> screwed, it'd take a massive effort to straighten it out. The
problem
> seems to be bytes getting juxtapositioned, and you can see what a
mess
> hdparam may make if its doing this already... It looks almost like
> being in 16-bit mode causes the thing to make screwups ala "middle
> endian" byte order.
>
> sugar:~# /sbin/hdparm -i /dev/hda
>
> /dev/hda:
>
>  Model=Seagate Technology 1275MB - ST31276A, FwRev=1.37,
> SerialNo=FNGRLSA
>  Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs
RotSpdTol>.5% }
>  RawCHS=2482/16/63, TrkSize=0, SectSize=0, ECCbytes=4
>  BuffType=0(?), BuffSize=0kB, MaxMultSect=16, MultSect=off
>  DblWordIO=no, maxPIO=1(medium), DMA=yes, maxDMA=2(fast)
>  CurCHS=2482/16/63, CurSects=2502308, LBA=yes, LBAsects=2502308
>  tDMA={min:120,rec:120}, DMA modes: *mword0 mword1 mword2
>  IORDY=on/off, tPIO={min:383,w/IORDY:120}, PIO modes: mode3 mode4
>
> sugar:~# /sbin/hdparm -I /dev/hda
>
> /dev/hda:
>
>  Model=eSgata eeThconolyg1 72M5 B -TS1372A6    , FwRev=.173    ,
> SerialNo=
>  Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs
RotSpdTol>.5% }
>  RawCHS=2482/16/63, TrkSize=0, SectSize=0, ECCbytes=4
>  BuffType=0(?), BuffSize=0kB, MaxMultSect=16, MultSect=off
>  DblWordIO=no, maxPIO=1(medium), DMA=yes, maxDMA=2(fast)
>  CurCHS=2482/16/63, CurSects=2502308, LBA=yes, LBAsects=2502308
>  tDMA={min:120,rec:120}, DMA modes: *mword0 mword1 mword2
>  IORDY=on/off, tPIO={min:383,w/IORDY:120}, PIO modes: mode3 mode4
>
>
> --
>
> Just for kicks, you can set the number of cylinders to ONE on your
> hard disk, if only Linux partitions reside on it. Since Linux uses
its
> own drivers for this, and LILO resides on the first track, it
actually
> works. Great for confusing people (Huh? You have a 504KB hard disk
and
> it holds all that??)
>
> --
> jkenner @ mindspring . com__
> I Support Linux:           _> _  _ |_  _  _     _|
> Working Together To       <__(_||_)| )| `(_|(_)(_|
> To Build A Better Future.       |                   <s>
>
> ________________________________________________
> See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail
doesn't post to the list quickly and you use Netscape to write mail.
>
> Plug-discuss mailing list  -  Plug-discuss@lists.PLUG.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss


________________________________________________
See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't post
to the list quickly and you use Netscape to write mail.

Plug-discuss mailing list  -  Plug-discuss@lists.PLUG.phoenix.az.us
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss