CD-R and where I'm at now

[Lucas Vogel]

Unfortunately, I'm using this HOWTO as well as a stock kernel. 

> -----Original Message-----
> From: Rod Roark [mailto:rod@sunsetsystems.com]
> Sent: Tuesday, June 06, 2000 1:53 PM
> To: plug-discuss@lists.PLUG.phoenix.az.us
> Subject: Re: CD-R and where I'm at now
> 
> 
> The following HOWTO pretty much covers it all.  If you've already
> followed it carefully, perhaps something is wrong with your 
> kernel build
> procedure and you should try a stock kernel.
> 
>   http://www.linuxdoc.org/HOWTO/CD-Writing-HOWTO.html
> 
> -- Rod
> 
> Marc Chung wrote:
> > 
> > at what point does nothing begin to work ..?
> > 
> > seems that you're running suse.. i'm assuming that it's 
> probably 6.4(?)
> > since it says 2.2.13 kernel.. dmesg also says scsi 
> emulation has been
> > compiled in (impt!) and that the ide-scsi module has 
> sucessfully been
> > loaded.. (also just to verify, are you running stock kernel 
> or a custom
> > config?)
> > 
> > have you tried running cdrecord -scanbus.. can you send me 
> that output too
> > 
> > thanks.
> > 
> > --
> > Marc Chung [mchung@asu.edu]
> > "I went to the woods because I wanted to live deliberately"
> 
> _______________________________________________
> Plug-discuss mailing list  -  Plug-discuss@lists.PLUG.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>